Tested & Certified to EN12566-1
Marsh septic tanks are either “traditional Onion shape septic”or the low profile cylindrical tanks that are designed for high water table or hard rock conditions. Marsh Septic Tanks can normally be installed in pea-shingle, they are tested and certified to EN12566-1, but for discharge into a land drainage system not ditch or watercourse. The septic tanks come complete with cover and frame. The septic tank is fitted with two Lloyds registered lifting eyes or slinging points. Installation in normal ground conditions is a pea shingle surround but concrete must be used for high water table areas. No power is needed for this tank. This septic tank is certified for installation throughout the EU. Manufactured in virgin resin (no chalk filler) and glass. If the property you are fitting this too is a new dwelling it would be advisable to check that Building Control will accept a septic tank in preference to an Ensign sewage treatment plant.
Ensign sewage plants are competitively priced and are tested to the highest European standards. They offer the option of Polylok Filters pre-fitted in the out let TEE piece of the septic tank, they are very easy to maintain, and prevent smell and the blocking of the soak away. Marsh hold EN12566 certification for Domestic Sewage Plants, Uni:Gem and three complete individual ranges of septic tanks.
Septic Tanks 2800L-10000L
Marsh has gained industry leading approvals and certification to EN12566-1 for its Spherical and Low Profile Cylindrical Marsh Standard Spherical Septic Tanks – A Traditional Spherical Septic Tank
This range is similar to other septic tanks, it offers lower levels of treatment to our other two septic tank ranges, Five Filter and Green Filter septic tanks. Septic tanks can not be discharged directly into a watercourse, river or ditch. Marsh septic tanks are manufactured from 100% glass and resin with no chalk fillers. The units can be ordered as a mixed size load or with other Marsh Industries products. Marsh Standard Septic Tanks without the Polylok Filter passed and were certified to the EN12566-1.
The ranges were tested for:
- Hydraulic Flow Efficiency
- Structural Strength
- Water tightness
- Design Characteristics
- Manufacture & Quality Systems
- Volume Calculations
These approvals mean that Marsh Industries are in a unique position throughout Europe with the approvals of three individual septic tank ranges.
These Marsh products can be used Europe wide.
Marsh Industries EN Standard Septic Tanks are made from virgin glass and resin (no chalk fillers). The units are strong and designed for a pea-shingle surround in good ground conditions
The Marsh Septic Tank is designed with its unique “Key In Rib” that makes installation faster and simpler. Turret extensions, along with chemical lining and low profile septic tanks are also available from Marsh Industries.