Warmup have an extensive range of easy to install StickyMat systems available for electrical underfloor heating. This system can be used as the primary heat source, providing that your room is insulated and complies with modern insulation levels.
Key Features of the Warmup StickyMat Systems
For a quick, easy and secure installation the StickyMat system is the perfect choice. The StickyMat consists of a thin loose wire that comes pre-spaced and secured to a glassfibre mesh. It is designed to simply be rolled out and affixed to the floor using the pressure sensitive adhesive, reducing installation time by 35%. The Mat can also be repositioned easily without losing adhesion. A full installation video can be found at the bottom of this page.
The StickyMat system is designed specifically for use under tile and stone flooring types (ceramic, quarry or natural stone tiles). To complete the job Warmup advise to either lay a thin layer of self-levelling screen over the mat or to trowel a full bed of flexible tile adhesive directly over the mat and lay floor tiles. It is also advised to allow the flexible adhesive to fully dry before turning on the heating, which can take between 7-10 days.It is possible (but not widely recommended) to lay this system underneath floor finishes such as wood or vinyl by applying a self levelling compound
over the heating mat. If this is done it is very important to ensure that all heating cables are completely covered with a minimum of 10mm self levelling compound. It is also important to check that the levelling compound is suitable for use with underfloor heating. For these flooring types Warmup also have a foil heating system and inscreed cable system available.
The StickyMats are produced from a sturdy glass fibre mesh for extra durability and have super sticky double-sided tape for a secure installation. For increased functionality, reduced heat-up times and reduced running costs it is also recommended to use the Warmup insulation boards underneath the StickyMat.
A thermostat is not included with the StickyMat system and will need to be purchased seperatley. This heating system however is compatible with all of the Warmup thermostats including the Tempo, the 3iE and their newest addition the 4iE Smart Wifi thermostat. To learn more about the thermostats and the benefits they offer please browse our Warmup Thermostat page.
The StickyMat systems come in many sizes ranging from 1m2to 15m2. They also come in different output options which consist of 150W output (red mat, blue wire) and a 200W output (blue mat, red wire). The 200W output system is generally chosen for use in higher loss areas such as conservatories.
The Warmup StickyMat systems are covered by a lifetime warranty and a full SafetyNet™ guarantee. This guarantee covers you from any accidental damaged caused to the system upon installation. Should this occur, Warmup will replace it with another heater of the same model for free.
Installing The Warmup Underfloor Heating Mat
The full range of StickyMat systems can be found on our online store here alongside any heating accessories.