Warmup Dual Overlay is a free-floating subfloor which offers a smooth and seamless finish for carpet, vinyl and linoleum flooring types. Similar to the insulated underlay, the dual overlay is designed for use with the Warmup foil heating kits.
Key Features of the Warmup Dual Overlay
Provides a stable subfloor
The Dual Overlay is designed to be used in conjunction with the Warmup foil heater system and the Warmup Insulated Underlay. As well as improving the efficiency of the heating system it also protects the electric heating wire from damage if the flooring is not laid immediately. The overlay will avoid any joints from the foil system showing through to the final floor finish.
Please note: The Dual Overlay system isn’t suitable for use in wet areas.
Easy to Install
The Warmup Dual Overlay is comprised of a 3mm deep base board and 4mm deep top board. It is designed to lay between the underlay and dual overlay. The floor finish can be either glued to the boards or simply laid freely upon them. If your floor finish needs to be fixed down (glued) such as carpet, then a combination of dual overlay, foil heater and insulated underlay should be used. Please refer to the installation manual for full instructions, and watch the installation video found at the bottom of this page.
An Installation Guide for the Warmup Foil Underfloor Heating System
To view more on the Warmup Dual Overlay, or any of the electrical underfloor heating products, please visits the Warmup brand page on our online store