Manrose XF150/ XP150 / WF150

The Manrose range of 150mm (6") Kitchen Fans comprises quiet, efficient, axial flow fans for wall, ceiling or window mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.
 
The Manrose 150 Series is ideally suited for domestic and commercial applications including kitchens, utility rooms, restaurants, offices and shops.

Key features include:

• Extract rate 230m³hr, 64 litres per second  
  
• Fans can be wall, ceiling or window mounted
  
• British made
  
• Designed to exceed the 1995 Building Regulations on Ventilation (F1)
  
• Tested to comply with HD280/BS3456 Part 102:342 1988
  
• 2 year no quibble guarantee
  
• BEAB Approved

150MM (6") Range of Extractor Fans

XF150 Series
The XF150 Series of 6" extractor fans can be wall or ceiling mounted. There are two models available in this range: The base model has a fixed louvre internal grille, while the automatic model has thermo-activated internal shutters which open silently approximately 45 seconds after the fan has been switched on (except the pullcord operated model). Both models are available in four options.

XF150A Series
The Standard option is for remote switching. Pullcord options are supplied with a built-in pullcord switch which open the shutters and start the fan motor unit. The Timer version incorporates an integral timer, adjustable between 1-20 minutes.

The Humidity Control option has a built-in humidity sensor which will switch on the fan when the humidity rises and off as it drops.


XP150/XP150A Series
The XP150 Series of 6" extractor fans comes complete with a through wall mounting kit. Each Pak contains 400mm of aluminium flexible ducting (when extended) and a grey external 6" wall grille for through wall fixing. Paks are available in basic or automatic versions as per the XF150 range.


WF150 Series
The WF150 Series is designed for window fitting through a standard 184mm (71/4") ø hole and can also be wall mounted using our wall fixing kit FK1 (catalogue No. 1300) available separately.
The WF150 Series base model has fixed louvres for trickle flow ventilation. The WF150M Series has external manual backdraught shutters, while the WF150A Series comes with thermo-activated internal shutters which open silently approximately 45 seconds after the fan has been switched on (except WF150AP pullcord operated model). As per the XF/XP150 Series it is available in the following options: Standard, Pullcord, Timer and Humidity control.


WF150M Series
The WF150 Series is pre-wired and comes complete with 1.5m of two core cable and, with the exception of the Standard option, includes a pullcord override switch. Timer and Humidity options also have a neon light.

Technical Data

Wall/Ceiling fans & paks Base model with fixed internal grille Catalogue No. Type
XF150
XP150 Standard model for remote switching.
XF150P
XP150P As above supplied with pullcord switch.
XF150T
XP150T Timer model incorporating integral adjustable electronic timer (adjustable 1-20 mins).
XF150TP
XP150TP As above but with pullcord override switch. Requires no switched live.
XF150H
XP150H Humidity control fitted with our new 2 speed option as standard. The fan will run at full speed on integral or remote switching but will run at about half speed when humidity rises over the pre-set level which is adjustable between 40% RH & 95% RH. Complete with integral adjustable timer (adjustable 1-20 mins). Secondary speed is also adjustable.
XF150HP
XP150HP As above but with pullcord override switch. Requires no switched live.

Wall/Ceiling Fans & Paks
Automatic model with internal shutters Catalogue No. Type
XF150A
XP150A Standard model for remote switching.
XF150AP
XP150AP As above supplied with pullcord switch.
XF150AT
XP150AT Timer model incorporating integral adjustable electronic timer (adjustable 1-20 mins).
XF150ATP
XP150ATP As above but with pullcord override switch. Requires no switched live.
XF150AH
XP150AH Humidity control fitted with our new 2 speed option as standard. The fan will run at full speed on integral or remote switching but will run at about half speed when humidity rises over the pre-set level which is adjustable between 40% RH & 95% RH. Complete with integral adjustable timer (adjustable 1-20 mins). Secondary speed is also adjustable.
XF150AHP
XP150AHP As above but with pullcord override switch. Requires no switched live.

Window Fans
Basic model with fixed grilles Catalogue No. Type
WF150 Standard model
WF150P Pullcord model
WF150T Timer model
WF150H Humidity control

Manual model with external shutter

Catalogue No. Type
WF150M Standard model
WF150MP Pullcord model
WF150MT Timer model
WF150MH Humidity control

Automatic model with internal shutters

Catalogue No. Type
WF150A Standard model
WF150AP Pullcord model
WF150AT Timer model
WF150AH Humidity control

Construction

These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.

Electrical

220-240V ~ A.C. 50Hz ns. Single phase consuming 25 watts in the 150 Series and 45 watts on the 150A series. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should not be accessible to a person using either the shower or the bath and mounted a minimum of 1.8 metres from the floor.

Motor

Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Guarantee

Two year no quibble guarantee.

Installation

XF150 Series. These fans are designed to be fitted in either a wall or a ceiling (Pullcord models wall mounting only). A wall fixing kit is available separately.

XP150 Series. These fans are designed for through wall fixing. Complete with Aluminium flexible ducting and wall grille.

WF150 Series. These fans are designed to be fitted in either a window or wall through a standard 184mm (7 ¼") hole. A wall fixing kit FK1 (1300) is available which comprises 7 ¼" wall plugs, screws and a 400mm length of 6" diameter aluminium flexible ducting (when fully extended).

Performance

XF/XP150 Series extract rate 230,³/hr, 64 litres per second.

WF150 Series extract rate 220m³/hr, 62 litres per second.

Packaging

XF150 Series in outer cartons of 10 measuring 595mm x 245mm x 450mm. Weight 11kgs.

XP150 Series in outer cartons of 10 measuring 1070mm x 263mm x 428mm. Weight 21kgs.

WF150 Series in outer cartons of 10 measuring 460mm x 640mm x 240mm. Weight 17kgs.

Additional Data

Maximum pressure: 50 p.a. Fan speed: 2400 r.p.m.
Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC.