Manrose XF120 / XP120 / WF120
The Manrose XF/XP/WF120 range of 120mm (5") bathroom/ toilet fans are quiet, efficient axial flow extractor fans for wall or ceiling mounting.
Designed for larger bathrooms, cloakrooms, toilets and medium sized rooms, the 120 series are 56% more powerful than their 100mm (4") counterparts, with an increased surface area of only 10%.
Moulded in high gloss ABS thermoplastics for modern appearance and ease of cleaning, the 120 series are easy to install, incorporate the latest technology and design and are subject to rigorous quality control checks.
There are seven models in this comprehensive range detailed in Technical Data opposite.
- The XF120 series comprises fan unit only or alternatively the XP120 fans are supplied with 400mm of aluminium flexible ducting (when extended) and an external 5" wall grille
- The WF120 series is for window mounting through a standard 140 - 155mm Ø hole
- The extraction rate of the 120 series is 130m³hr, 36 litres per second and complies with the 1995 Building Regulations on Ventilation (F1)
- Tested to comply with HD280/BS3456 Part 102:342 1988
- 2 year no quibble guarantee
- Rated to IP44
Technical Data
| Catalogue No. |
Type |
XF120S
XP120S |
Standard model for remote switching. |
XF120P
XP120P
WF120P |
As above supplied with pullcord switch. |
XF120T
XP120T
WF120T |
Timer model incorporating integral adjustable electronic timer (adjustable 1-20 mins). |
XF120TP
XP120TP |
As above but with pullcord override switch. Requires no switched live. |
XF120H
XP120H
WF120H |
Humidity control fitted with our new 2 speed option as standard. The fan will run at full speed on integral or remote switching but will run at about half speed when humidity rises over the pre-set level which is adjustable between 40% RH and 95% RH. Complete with integral adjustable time(adjustable 1-20 mins). Secondary speed is also adjustable. |
XF120HP
XP120HP |
As above but with pullcord override switch. Requires no switched live. |
XF120PIR
XP120PIR
WF120PIR |
PIR activated model with adjustable timer which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch. Timer adjustable between 1-20 mins. Requires no switched live. |
| XF120MH |
Electro-Mechanical Humidity Control with on/off switch adjustable 20-90% RH. |
| XF120MHP |
As above but with pullcord switch and neon light. |
| XF120MHT |
As XF120MH but with electronic timer. |
Construction
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and appearance.
Electrical
220-240V ~ A.C. 50Hz ns. Single phase consuming 25 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan must not be accessible to a person using either the shower or the bath and mounted a minimum of 1.8 metres from floor.
Motor
Single phase induction motors with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee
Two year no quibble guarantee.
Installation
XF120 Series designed to be mounted on walls or ceilings (pullcord models wall mounting only) through 120mm (5") diameter flexible or rigid pipes. Also suitable for use with the Manrose low profile flat channel ducting systems.
XP120 Series designed for through wall fixing and comes complete with aluminium flexible ducting and external wall grille.
WF120 Series designed for window mounting through a standard 140mm - 155mm Ø hole.
Performance The extract rate of all models is 130m³hr, 36 litres per second.
Packaging
XF120 Series in outers of 10 measuring 400mm x 215mm x 490mm and weighs 8 kgs.
XP120 Series in outers of 10 measuring 398mm x 210mm x 825mm and weighs 10 kgs.
WF120 Series in outers of 10 measuring 446mm x 225mm x 550mm and weighs 10 kgs.
Additional Data
Maximum pressure: 35 p.a. Fan speed: 2000 r.p.m.
Sound volume: 41.0 dB(A) Maximum operating temperature 400C |
