Mira Coda Thermostatic Shower

Mira Coda Description

A sleek exposed bar valve, Mira Coda makes control easy and stylish too. Thermostatic technology means that your shower adjusts to any sudden changes in temperature, so you enjoy a safe and comfortable shower every time.

• Thermostatic safety - protection for the family
• Maximum temperature stop for safe showering
• 3 mode, style matched handset
• Operates on all plumbing systems
• Z - connector swivel for easy installation
• Secure mounting with patented brass wall bracket
• Simple maintenance, with easy access to flow and temperature cartridges
• Excellent spares service, with best in class after sales service
  

Plumbing System Compatibility

• Fully modulating combi boilers and instantaneous gas water heaters
• Gravity-fed hot and cold water supply
• Gravity-fed hot and cold pumped water supply
• Mains pressure hot and cold - unvented
• Mains pressure thermal store
  

Mira Coda Product Range

Mira Coda (including Fittings)

Surface mounted shower control and Mira Coda fittings kit including adjustable spray showerhead with three different spray actions, hose, clamp bracket, slide bar and hose retaining ring.

Mira Coda (Valve Only)

Surface mounted shower control

Principle of Operation

This fully thermostatic shower control mixes hot and cold water to the desired showering temperature. It automatically compensates for variation in both the temperature and pressure of the inlet water supplies to maintain the blend temperature.

Limitations of Use

The Mira Coda should not be used for applications where an outlet flow control forms part of the shower fitting. The product and its components are only suitable for normal water supplies and should be cleaned only with mild washing up detergent or soap solution.

Temperature

• Maximum inlet hot water temperature: 90^oC for short periods (BS6700 recommends a maximum of 65^oC)
• Minimum inlet hot water temperature : 55^oC
• Minimum temperature differential between blend and hot: 12^oC
• Hot and cold supplies to be at a nominally equal pressure
• Maximum pressure imbalance 5:1

Pressure (inlet supplies)

• Minimum pressure : 0.1 bar
• Maximum maintained pressure : 5.0 bar
• Maximum static pressure : 10.0 bar

Performance

• Flow rate is fully adjustable
• Temperature is user selectable from full cold to a factory set safe maximum, which can be over-ridden by the user if required
• Wax capsule thermostatic cartridge technology controls outlet temperature stability between 20^oC and 50^oC
• Optimum thermostatic control between 35^oC and 45^oC (the specification outlined below is temperatures of 15^oC cold and 65^oC hot and nominally equal inlet supply pressures)
• The blended water temperature is maintained within 2^oC with a 10^oC change in either the hot or cold supply
• The Mira Coda will effect a shutdown in typically two seconds if either the hot or cold supply fails (note shutdown will only occur if the hot supply is more than 10^oC above the blend temperature).

Accessories

Optional DCV-H: outlet double check valve for use with pressure above 0.2 bar is available, providing an alternative method of complying with Water Regulations

Guarantee

Guaranteed for five years from date of purchase against faulty materials or workmanship.

Application

The Mira Coda is suitable for installation as part of the following plumbing systems:

• Gravity fed
• Fully modulating instantaneous gas heated*
• Mains pressurised (heated from a thermal store)*
• Unvented mains pressure*
• Pumped*

*When the Mira Coda is used with mains pressure appliances at pressures above 5.0 bar maintained, a drop tight pressure reducing valve must be installed to maintain performance.

Installation

The plumbing installation must comply with the requirements of UK Water Regulations / Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertakers.

The installation should be carried out by a plumber or contractor who is registered or is a member of an association.

Protect the product from damage whilst making soldered connections. Some fluxes can cause damage to plastic components.

Mira Discovery Surface Mounted (Shower Control only)

• Adjustable inlet elbows accept rear entry supplies
• Variable inlet centres: 126 - 174mm
• Inlet connections : 1/2" BSP male
• Outlet connections : 1/2" BSP male
• Patented mounting bracket supplied for simple installation to stud partition, laminated panel or unfixed pipework

Click to view our full range of Mira Coda available to buy on-line.