Bristan is a leading supplier of bathroom showers, taps and accessories. A part of their range is the Bristan iD collection, a simple to use range of products which are also simple to install yet with Bristan’s trademark stunning design.
The Prism semi-integrated shower valves have been developed to be teamed with a glass walk-in panel to create a wetroom look that is not only stylish, but is easily accesible.
Step 1 – Fit the Glass
Fit the profile to the wall at the desired distance and slot the glass into place. Secure with the screws provided.
Step 2- Fit the Valve
Make sure any debris is fully flushed out of the pipework. Fix the valve to the wall parallel to the glass, using the instructions supplied.
Step 3 – Positioning the Kit
Screw the vertical riser to the arm and connect the bottom of the riser to the top of the shower valve. Extend teh shower arm to the glass and mark out the location of the fixing holes on the wall. Take the kit down and drill a suitable sized hole for the fixing.
Step 4 – Fit the Pole and Arm
Screw the vertical pole into the top of the valve and fix the arm to thew all using the screws provided. Adjust the overhead shower arm so that it fits over the screen. Adjust the width as needed by sliding the poles together and lock in to place by rotating the sleeves either side of the showerhead outlet.
Step 5 – Attach to the Screen
Ensure the overhead arm is level by using the glass clamp adjuster. Check with a spirit level and use the spacers provided to ensure a secure fit. Once attached, tighten the grub screws. Attach the shower rose by carefully screwing it into the overhead arm and the job’s finished.