Aqualisa - Quartz Digital Concealed Shower

Concealed with adjustable height head and body jets

• Quick and easy installation, minimal damage to décor
• All components in one system pack
• Integral safety features
• Supplied with Varispray shower head
• Compatible with virtually all approved UK domestic water systems
• 5 year comprehensive manufacturer's guarantee

Power Source

230Vac supply via outlet fused at 3amps (2 metres of cable supplied)

Power Consumption

Standard Unit

230Vac 5 watts idle

20 watts peak during valve positioning.

Pumped Unit

230Vac 5 watts idle.

100 watts on normal/150 watts on boost.

Voltage at control is 5Vdc.

Power consumption of LED is 1 watt.

Water Pressures (at processor inlets)

Standard Unit

Minimum - 100kPa (1 bar) (10 metre head)

Maximum - 700kPa (7 bar) (70 metre head)

We do not recommend the use of the Quartz body jet system with combination boilers.

Pumped Unit

Minimum - The base of the processor must be sited no higher than the base level of the cistern.

Maximum - 100kPa (1 bar) (10 metre head). The pumped unit must not be connected to a mains supply.

Flow Rate (litres per minute)

Standard Unit

High pressure unvented system, 3 bar - 18 ltr/min

Flow rates when installed on a combination boiler can vary. Check suitability before installation.

Pumped Unit

Normal at 1 metre head - 13 ltr/min

Boost at 1 metre head - 18 ltr/min

(pump rating 15 minutes in 1 hour)

Temperatures

Factory Preset 45 degrees centigrade (+/- 1 degree centigrade)

Range of adjustment via adjustment screw on processor depending on incoming water temperature.

Maximum - 55 degrees centigrade (recommended max temp 46 degrees centigrade)

Minimum - 15 degree centigrade

Connections

Processor 15mm push-fit.

Hot/cold pipe centres for both processors 48mm.

Wall outlet 15mm push-fit connection.

Connections are suitable for copper or plastic pipe.

Data Cable Length

10 metres. Must be run in suitable sized conduit to allow for easy removal.

Approvals

BEAB approved to BS EN 60335 and BS EN 60730. Conforms to EC regulations.

Water System Compatibility

Standard Processor

Combi systems, Mains fed system and unvented.

Pumped Processor

Gravity systems

Body Jet Assembly Control

The integral diverter control knob can be rotated to select shower head only, body jets only, or simultaneous use of all outlets, by selecting the relevent symbol positions.