Aqualisa - Axis Digital Concealed With Fixed Head

Concealed shower with wall mounted fixed head, or with ceiling mounted and flush ceiling head

Quick and easy installation, minimal disruption to décor
All components in one system pack
Integral safety features
Choice of monospray shower systems: wall mounted head, or ceiling mounted and flush ceiling head
Compatible with virtually all approved UK domestic water systems
5 Year comprehensive manufacturer's guarantee

Power Source

230Vac supply via outlet fused at 3amps (2 metres of cable supplied)

Power Consumption

Standard Unit

230Vac 5 watts idle.
20 watts peak during valve positioning.

Pumped Unit

230Vac 5 watts idle.
100 watts on normal/150 watts on boost.
Voltage at control is 5Vdc.
Power consumption of LED is 1 watt.

Water Pressures (at processor inlets)

Standard Unit

Minimum - 100kPa (1 bar) (10 metre head)
Maximum - 700kPa (7 bar) (70 metre head)

Combination boilers must have a minimum domestic hot water rating of 24kW (80,000 Btu) and must be of the type fitted with a fully modulating gas valve.

Pumped Unit

Minimum - The base of the processor must be sited no higher than the base level of the cistern.
maximum - 100kPa (1 bar) (10 metre head). The pumped unit must not be connected to a mains supply.

Flow Rate (litre per minute)

Standard Unit

High pressure unvented system, 3 bar - 18 ltr/min
Flow rates when installed on a combination boiler can vary. Check suitability before installation.

Pumped Unit

Normal at 1 metre head - 13 ltr/min
Boost at 1 metre head - 18 ltr/min
(pump rating 15 minutes in 1 hour)

Temperatures

Factory preset - 45 degrees centigrade (+/- 1 degree centigrade)
Range of adjustment via adjustment screw on processor depending on incoming water temperature.
Maximum - 55 degrees centigrade (recommended max temp 46 degrees centigrade)
Minimum - 15 degrees centigrade